NetApp NS0-180 Exam With Updated Exam Questions – [Dec-2017 Dumps]

This NetApp Certified Storage Installation Engineer, ONTAP NS0-180 exam required skills and knowledge if you want to pass NS0-180 exam. NetApp Certified Storage Installation Engineer NS0-180 exam dumps is designed in a way that it cover all the key points of actual NS0-180 exam. Braindumps4cisco provide you latest exam questions that realy provide you assistance in you actual IT Fundamentals NS0-180 exam. There are four basic domains to be measured by this exam are Specialist, and .

Version: 9.1
Question: 1

What is a protocol?

A. SnapRestore
B. CIFS
C. SnapMirror/SnapVault
D. FlexClone

Answer: B

Question: 2

According to NetApp best practices, which two sets of protocols would be assigned to the same storage virtual machine (SVM)? (Choose two.)

A. FCP, NFS
B. CIFS, iSCSI
C. NFS. CIFS
D. FCP, iSCSI

Answer: C

Question: 3

New Updated NS0-180 Exam Questions NS0-180 PDF dumps NS0-180 practice exam dumps: https://www.dumpsschool.com/NS0-180-exam-dumps.html (65 Questions)

What happens to the NTP configuration in clustered Data ONTAP 8.3 when a node joins a cluster?

A. A node that joins a cluster has a separate NTP service.
B. A node that joins a cluster automatically adopts the NTP configuration of the cluster.
C. A node that joins a cluster must be manually configured in the NTP.
D. A node that joins a cluster must reboot before running the NTP service.

Answer: B

Explanation:
A node that joins a cluster automatically adopts the NTP configuration of the cluster.
Reference: How to configure and troubleshoot NTP on clustered Data ONTAP 8.2 and later using CLI
https://kb.netapp.com/support/index?page=content&id=1014787

Question: 4

You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?

A. You cannot install five SSD shelves to one System.
B. You need at least two stacks.
C. You need at least three stacks.
D. You can put all shelves in one stack.

Answer: D

Explanation:
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s).
Reference: Making the Move from FC to SAS Storage
http://www.netapp.com/as/communities/tech-ontap/tot-fc-sas-1101-as.aspx

Question: 5

Which three types of interface groups are supported on NetApp storage systems? (Choose three.)

A. single mode
B. HA interconnect
C. IPspaces
D. static multimode
E. dynamic multimode

Answer: A,D,E

Explanation:
You can create three different types of interface groups on your storage system: single-mode, static multimode, and dynamic multimode interface groups.
Reference: Types of interface groups
https://library.netapp.com/ecmdocs/ECMP1196907/html/GUID-EFA72201-E035-41E2-AC53-CD81A472B5ED.html

Question: 6

You have just configured the customer’s first SVM with a LIF IP 10.0.0.10/24. The customer’s DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.
In this scenario what is the problem?

A. You need to have the DNS server on the same subnet as the LIF IP address.
B. You need to add a static gateway to the LIFs routing group.
C. You need to have the customer check the cable.
D. You need to add an IPspace and domain broadcast to the port.

Answer: D

Explanation:
A broadcast domain resides in an IPspace, and it contains a group of network ports, potentially from many nodes in the cluster, that belong to the same layer 2 network. The ports in the group are used in an SVM for data traffic.
Reference: Clustered Data ONTAP 8.3, Network Management Guide, page 8

         

Facebook Comments