Valid NetApp Certified Storage Installation Engineer, ONTAP NS0-181 Braindumps – [August-2018 Dumps]
|Full Exam Name||NetApp Certified Storage Installation Engineer, ONTAP|
|Certification Name||NetApp Certified Storage Installation Engineer, ONTAP|
It is more easier to pass the NetApp Certified Storage Installation Engineer, ONTAP NS0-181 exam by using OUR valid NetApp NCSIE, ONTAP NS0-181 braindumps. Immediate access to the Most latest NetApp NS0-181 braindumps and find the same core area NS0-181 questions with verified answers, then PASS your NetApp NS0-181 exam with a high score now.
♥ 2018 Valid NS0-181 Braindumps ♥
NS0-181 exam questions, NS0-181 PDF dumps; NS0-181 exam dumps:: NS0-181 Dumps ( Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)
Latest and Most Accurate NetApp NS0-181 Braindumps:
You are asked to complete a 2-node installation of a FAS8060 cluster running clustered Data ONTAP 8.3. The hardware has been installed and the cluster has been configured. AutoSupport testing has not been successful because NetApp Support cannot see any messages, and the customer does not have any messages in their inbox.
Which two actions should be performed to test the functionality from the NetApp cluster? (Choose two.)
A. Verify that the network gateway responds to a ping request.
B. Verify that the mailhost responds to a ping request.
C. Verify that the domain controller responds to a ping request.
D. Verify that the cluster interconnect switches respond to a ping request.
B: Check that the mail host specified in the options is a host that the storage system can talk to, by running the following command on the storage system: ping mailhost_name mailhost_name is the name of the mail host specified in the AutoSupport options.
D: If the system cannot deliver AutoSupport messages over SMTP you should confirm basic network connectivity and DNS lookup: Your network management LIF must be up for operational and administrative status.
You must be able to ping a functioning host on the same subnet from the cluster management LIF (not a LIF on any of the nodes). You must be able to ping a functioning host outside the subnet from the cluster management LIF. You must be able to ping a functioning host outside the subnet from the cluster management LIF using the name of the host (not the IP address).
Reference: How to troubleshoot AutoSupport delivery when using SMTP
Reference: Troubleshooting AutoSupport message delivery over SMTP
You are performing an installation of a clustered Data ONTAP and you reach the AutoSupport configuration point. You configured AutoSupport with all of the customer’s information. But when you trigger AutoSupport, the customer says that they did not receive the message, and neither did NetApp.
Which two actions must be verified? (Choose two.)
A. You can ping the mailhost from the NetApp storage systems.
B. The customer has enabled port 25 from the storage controllers on their firewall.
C. The customer has enabled routing of email-based messages from the storage controllers on their email server.
D. You can ping the NetApp Support site from the storage systems.
What happens to the NTP configuration in clustered Data ONTAP 8.3 when a node joins a cluster?
A. A node that joins a cluster has a separate NTP service.
B. A node that joins a cluster automatically adopts the NTP configuration of the cluster.
C. A node that joins a cluster must be manually configured in the NTP.
D. A node that joins a cluster must reboot before running the NTP service.
A node that joins a cluster automatically adopts the NTP configuration of the cluster.
Reference: How to configure and troubleshoot NTP on clustered Data ONTAP 8.2 and later using CLI
You are assigned to install five DS2246 with twenty-four 400 GB SSDs per shelf to a single node system.
According the NetApp, which statement is correct?
A. You cannot install five SSD shelves to one System.
B. You need at least two stacks.
C. You need at least three stacks.
D. You can put all shelves in one stack.
Up to 10 shelves are supported per stack for the DS2246, so we one stack is enough as we only have five shelves (DS2246s).
Reference: Making the Move from FC to SAS Storage
Which three types of interface groups are supported on NetApp storage systems? (Choose three.)
A. single mode
B. HA interconnect
D. static multimode
E. dynamic multimode
You can create three different types of interface groups on your storage system: single-mode, static multimode, and dynamic multimode interface groups.
Reference: Types of interface groups
You have just configured the customer’s first SVM with a LIF IP 10.0.0.10/24. The customer’s DNS IP address is 172.16.0.250 and you are unable to ping it from the NetApp storage system, but you are able to ping the gateway and everything else works.
In this scenario what is the problem?
A. You need to have the DNS server on the same subnet as the LIF IP address.
B. You need to add a static gateway to the LIFs routing group.
C. You need to have the customer check the cable.
D. You need to add an IPspace and domain broadcast to the port.
New Updated NS0-181 Exam Questions NS0-181 PDF dumps NS0-181 practice exam dumps: https://www.dumpsschool.com/NS0-181-exam-dumps.html